Complete service
Oil, filters, fluids, chassis checks, regular maintenance and service inspections.
What the service covers
Autoservis 1 • Unhošťská 92 • Červený Újezd
Looking for an auto repair shop near Prague without driving into the city centre? Autoservis 1 is a local workshop in Červený Újezd at Unhošťská 92, close to Unhošť and Prague-West. We help Czech and international drivers with diagnostics, brakes, oil service, tyres and Czech STK preparation. Write in English if that is easier: a clear description of the symptom is enough to start.
We inspect first, explain the options, agree the price, then repair.
Mon-Fri, 8:30-17:00. If the car is not drivable or there is a safety issue, calling is fastest.
Auto repair shop
We work on common passenger cars and light commercial vehicles: oil, brakes, tyres, diagnostics and Czech STK preparation. You can write to us in English, and every job starts with a check, a clear recommendation and an agreed next step.
Oil, filters, fluids, chassis checks, regular maintenance and service inspections.
What the service coversFault-code scanning, live-data checks and practical troubleshooting before parts are replaced.
How diagnostics worksPads, discs, drum brakes, brake fluid and checks of parts that affect safety.
Brake service detailsTyre changes, balancing, puncture repairs, valves and tyre recommendations if needed.
Tyre prices and bookingSend an enquiry in English even if you are not sure about the Czech repair terms. A simple description is enough.
How we help expatsPre-inspection check before Czech STK, the Czech roadworthiness inspection.
How STK preparation worksTiming belts, clutches, gearbox oils and repairs based on the car's actual condition.
Engine repair detailsFor drivers around Červený Újezd, Unhošť, Hostivice, Rudná and Zličín we handle a full tyre change from 1,000 CZK, a full wheel-set swap for 600 CZK and puncture repair from 200 CZK.
What we can help with
When a car problem appears, it helps to know when a request is enough and when calling is faster. These common situations explain what to prepare and what the next step usually is.
We run a fault-code scan and verify the cause. Simply clearing the fault is usually not enough; the important part is finding why the warning appeared.
Engine warning light checksBrakes and chassis issues should be checked early. We inspect pads, discs, fluid, play, shock absorbers and other parts that affect safety.
Brake and chassis checkSTK is the Czech technical inspection, similar to MOT. Before it we check lights, brakes, tyres, chassis, fluids, warning lights and visible issues.
Czech STK preparationOil, filters and fluid replacement are a good base. During the visit we can also check items that often become a problem later.
Oil and filter changeFor routine work, the price guide helps. For faults, inspecting the car first is more reliable because the same symptom can have a simple or more complex cause.
View price guideUse simple English. Tell us what happens and when it happens, whether the car can still be driven and attach a photo or STK report if you have one.
English enquiry guideWhen to call
The hardest part is often knowing what to do next. We separate safety issues that are better handled by phone from regular service enquiries that can be described in the form.
If the car brakes poorly, leaks fluid, shows a red warning light, smokes heavily, loses power or is not drivable, calling is faster and safer.
Call workshopIf the car drives as usual and you need oil, tyres, Czech STK preparation or diagnostics, send a short description in English and attach a photo or STK report if it helps.
Send enquiryAfter checking the car, we explain what affects safety or could cause further damage, and what can be planned later. You can decide with clearer information.
How the process worksA clear service process
When your car needs work, you should know what will happen and why. We inspect the vehicle first, explain the possible solution, agree a price estimate and only then continue with the repair.
Clear repair process
We inspect the vehicle first, explain what we found and agree the work needed. We start only after we agree the next step and price estimate.
We do not repair blindly. First we look for the cause of the issue, then suggest a solution based on the car's actual condition.
Before we start, we agree the work needed, parts availability, estimated price and expected completion date.
You will find the workshop in Červený Újezd at Unhošťská 92, easy to reach from Unhošť, Prague-West and nearby towns.
The Autoservis 1 Google profile lets you quickly check the address, navigation, current photos and customer reviews. We keep the website and Google profile information consistent.
If you have visited the workshop and everything went well, a short Google review helps other drivers around Červený Újezd, Unhošť and Prague-West find a reliable local car service.
Real workshop work
Real photos show the service process better than stock images. We inspect the parts first, explain what we found and agree the next step before repair work begins.
For similar jobs we document the initial condition, remove the necessary parts and check whether damage reached components behind the bumper.
View the full example
Cloudy headlights reduce visibility and can be an issue during Czech STK inspection. We check the condition first and agree the next step based on the actual wear.
View example
When there is humming, play or instability from a wheel, we inspect the hub, bearing and surrounding parts before agreeing on the work needed.
View example
For larger damage, we also photograph parts that are not visible from outside. It helps explain why the next step is agreed only after inspection.
For more involved repairs we check related parts and agree the next step according to the car's actual condition, so the customer knows what will be handled.
For brake work we check wear on discs, pads and related parts. The customer knows why replacement makes sense before work continues.
The visible condition of the parts helps explain the work needed. The goal is not just replacement, but a safe, working brake system.
If you send a photo of visible damage or an issue, we can assess the next step faster. For bodywork, we will clearly say what makes sense to handle.
Price guide
Prices are indicative and the final price is always confirmed depending on the vehicle type, work needed and parts availability. We're not VAT-registered.
Parts prices vary by car make, engine version and availability. For more involved repairs, we always agree the work needed and estimated price first. See the complete car servicing and tyre service price list.
Before sending a request
The form should stay simple. Only contact details, service type and issue description are required. Vehicle details and drivability are optional, but if you know them, they speed up communication. You can write the request in English.
Local car service
You will find Autoservis 1 at Unhošťská 92 in Červený Újezd. The workshop is easy to reach from Unhošť, Hostivice, Rudná, Kladno and the Prague-West area. For foreign drivers, the main advantage is a simple written request in English and a repair process agreed before we start.
Workshop advice
The advice section helps drivers decide when a written request is enough and when calling is safer or faster.

What to do, when to book diagnostics and when calling is safer.
Read advice
Squeaking, vibration and other signs that brakes need checking.
Read advice
FAQ
Short answers to common questions before diagnostics, tyre service or Czech STK preparation.
Fault-code scan and basic diagnostics are listed from CZK 300. For a more complex issue, we confirm the price according to time and troubleshooting scope.
No. VIN is optional. If you know it, it helps us find the correct parts and technical vehicle details faster.
No. Mileage is optional too. If you add it, it helps us estimate wear and suggest the right next step.
During opening hours Mon-Fri, 8:30-17:00 we try to reply as soon as possible by phone or e-mail.
Autoservis 1 is located at Unhošťská 92, 273 51 Červený Újezd, Czech Republic. Open route in Google Maps.
Yes. The online enquiry form is suitable for regular service, diagnostics, tyre service, Czech STK preparation and issue descriptions. For urgent safety issues, calling is better.
Yes. You can send your enquiry in English through the form. Describe the issue in plain English; you do not need the Czech name of the part.
Write when the problem appears, what you hear or feel, whether a warning light is on and whether the car can still be driven. A photo or short video frame can also help.
STK is the Czech mandatory technical inspection, similar to the UK MOT or other roadworthiness inspections. It is performed by an inspection station, not by the workshop.
Yes. We can check lights, brakes, chassis, fluids, tyres, warning lights and visible issues before the inspection. We cannot guarantee the inspection result because STK is performed by the inspection station.
Send your name, phone, e-mail, service type, vehicle make and model if you know them, a short issue description, preferred date and any photo or STK report if available.
Yes. The workshop is practical for foreign drivers and expats living around Červený Újezd, Unhošť, Prague-West, Hostivice, Rudná, Kladno and nearby towns.
Yes, the form accepts JPG, PNG or PDF up to 8 MB. It is useful for warning lights, Czech STK reports or visible damage.
Yes. We inspect the problem first, suggest the solution and price estimate, and continue only after agreement.
Yes. We check the vehicle before inspection, point out issues and agree on necessary repairs. STK is the Czech technical inspection, similar to MOT.
Yes. We handle tyre changes, balancing, wheel set changes, puncture repairs and valves depending on the vehicle and availability.
If the car drives as usual, send an enquiry or call us. If the car jerks, loses power, smokes or a red warning light is on, calling directly is safer.
Squeaking may be minor, but it can also mean worn pads, discs or another brake issue. If you notice grinding, vibration, a soft pedal or longer stopping distance, call and book a check.
Typical signs include knocking, play, the car pulling to one side, vibration, uneven tyre wear or uncertain handling when cornering or braking.
Call for a car that cannot be driven safely, red warning light, visible fluid leak, burning smell, serious noise, loss of power or suspected brake problem.
It is better to call or send an enquiry first. We can agree on the right time, expected work and workshop capacity.
We work on common passenger and commercial vehicles. For a specific car, send the make, model and issue description.
Customers usually come from Červený Újezd, Unhošť, Prague-West, Hostivice, Rudná, Kladno and surrounding towns.
Contact
Calling is usually fastest. If we do not pick up, we are probably working on a car and will call you back.
Start navigation
Open in Google Maps